White Spectra VX3 Bedienerhandbuch PDF herunterladen (Seite 21)

Page 2-3

Spectra VX

User’s Guide

saved to memory and recalled each time VX

is powered on.

Restoring factory settings is covered in Chapter 7.

Ground Balance

’s automatic ground balance system has a fast-track

mode that attempts to balance the system to soil conditions

within 20 seconds of turn-on. If you do not begin searching

within 20 seconds or the ground is unusually trashy, VX

may

not fast-track correctly and you may want to do a manual

ground balance:

• Squeeze/hold the Trigger, then press/hold

ENTER.

• Pump the search coil over the ground (1-12 inches) until the

background hum becomes steady (usually 4 to 6 times). Make

sure you do this over an area free of targets.

• Release ENTER, then release the Trigger, and begin searching.

This manual ground balance sequence can be done at any

time during normal search. Once the initial ground balance is

completed, VX

will automatically track to most typical ground

mineral changes.

Tip: If you release the trigger before releasing ENTER, VX

will lock the screen to pinpoint mode. Simply pull the trig-

ger twice to resume searching.

No Targets

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 87 88

Keine Kommentare

White Spectra VX3 Bedienerhandbuch Seite 21